To Use Crop Encoding - Samsung SND-6083 User Manual

to use crop encoding

1. Select <use>.
2. Click <Set area>.
The Crop Encoding Area Setup window
will pop up.
3. Select <ratio>.
• Ratio: It sets up the aspect ratio of
the user specified area.
- 16:9 : The aspect ratio shall be
set to 16:9 as close as to the user
specified area.
The supporting size ranges from
426X240 to 1280X1024 and
supporting output resolutions are
320X180, 640X360, 800X450, and
1280X720.
- 4:3 : The aspect ratio shall be set to 4:3 as close as to the user specified area.
The supporting size ranges from 320X240 to 1280X960 and supporting output
resolutions are 320X240, 640X480, 800X600, 1024X768, and 1280X960.
- Manual : It sets up the aspect ratio of the user specified area.
The supporting size ranges from 320X240 to 1280X1024 and all supporting output
resolutions are available except 1920X1080.
4. Drag the mouse on the screen to specify the Crop Encoding area at your discretion.
If set to <Manual>, the output image may be different from the actual one because of the aspect
`
J
ratio inconsistency between the Crop Encoding area and the output resolution.
The Crop Encoding area setup can change depending on the DIS setup. Reset the Crop Encoding
`
area when the DIS setup is changed.
English _75