Video Analytics - Samsung SCD-5080 User Manual

camera operation

ViDEo analYTiCs


❶
If the SPECIAL menu screen is

displayed, use the Function Setup
switch so that the arrow indicates
'VIDEO ANALYTICS'.
❷ Select a desired mode using the
Function Setup switch.
- TAMPERING : If the screen view
SENSITIVITY : Set the sensitivity to tampering detection.

ALARM OUT : Outputting of detection signals can be set.

RETURN : Return to the VIDEO ANALYTICS menu.

M
In the following cases, the initially set tampering detection function can malfunction.
- In a monitoring environment with a simple background or an environment with low light level or at
night, the detection performance can deteriorate.
- Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering.
- Immediately after tampering, the camera tampering detection can take up to a max of five seconds.
- If camera tampering is detected, after some time(five sec), stabilization will be done before
restarting. During stabilization, there is no detection.
- MOTION : This product
DET. SIZE : Selects an object size to detect on the screen.

2_ camera operation
is obstructed or the
camera location
is changed,
tampering
detection, you can
issue an event signal by setting it.
generates signals
each time an object
movement is detected
in the four areas of
the screen so efficient
monitoring can be
achieved.
VIDEO ANALYTICS
▶ 1. TAMPERING
2. MOTION
RETURN
3.
TAMPERING
SENSITIVITY
▶ 1.
ALARM OUT
2.
RETURN
3.
MOTION DET
DET. SIZE
▶ 1.
DET. AREA
2.
NON DET. AREA
3.
4. INDICATOR
ALARM OUT
5.
RETURN
6.
OFF
OFF
MIDDLE
OFF