Samsung SND-5011 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. iPolis SND-5011
  6. User manual

Samsung SND-5011 User Manual

Hide thumbs Also See for SND-5011:
Table of Contents

Advertisement

Quick Links

See also: Quick Manual

NETWORK CAMERA

SND-5011/SND-5061/

User Manual

SND-7011/SND-7061

Advertisement

Table of Contents
loading

Related Manuals for Samsung SND-5011

Summary of Contents for Samsung SND-5011

  • Page 1: Network Camera

    NETWORK CAMERA SND-5011/SND-5061/ User Manual SND-7011/SND-7061...
  • Page 2 Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

  • Page 3: Important Safety Instructions

    overview important Safety inStructionS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

  • Page 4: Explanation Of Graphical Symbols

    overview warninG TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected.
  • Page 6 overview Please read the following recommend safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. y Do not place this apparatus near conductive material.

  • Page 7: Table Of Contents

    Important Safety Instructions Product Features Recomended PC Specifications What’s Included At a Glance (SND-5011/SND-7011) At a Glance (SND-5061/SND-7061) iNSTALLATioN & Installation CoNNeCTioN (SND-5011/SND-7011) Installation (SND-5061/SND-7061) Connecting with other Device NeTwoRk CoNNeCTioN Connecting the Camera Directly AND SeTup to Local Area Networking...

  • Page 8: Overview

    overview web vieweR Connecting to the Camera Login Installing STW WebViewer Plugin Using the Live Screen SeTup SCReeN Setup Video Setup Network Setup Event Setup System Setup AppeNDix Specification Product Overview Troubleshooting Open Source Announcement License GPL/LGPL Software License 8_ overview...

  • Page 9: Product Features

    proDuct featureS • multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. • web Browser-based monitoring Using the Internet web browser to display the image in a local network environment. • alarm If an event occurs, the event-related video will be transferred to the email or FTP server specified by the user.

  • Page 10: What's Included

    Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name SND-5011/SND-7011 Camera SND-5061/SND-7061 Instruction book, Installer S/W CD, CMS S/W DVD Quick Guide (Optional) Used to test the camera...

  • Page 11: At A Glance

    GLance (SnD-5011/SnD-7011) appearance Item Description Dome Cover Dome cover for the lens and unit protection. Main unit Main unit includes the lens, switch board, PCB boards and screws. Power Port Used to plug the power cable. BROWN = Alarm IN Used to connect the alarm input sensor.
  • Page 12 overview components Item Description Using the test monitor cable, you can connect to a mobile display for camera Monitor to install test. Resets the camera settings to the default. Press and hold for about 5 seconds to reboot the system. If you reset the camera, the network settings will be adjusted so that Reset Button DHCP can be enabled.
  • Page 13 Item Description Inner Cover Cover used to protect the main unit. Bracket Used to install the camera on the wall or ceiling with the screws. Wiring Cover If installation requires drilling, run the cable through here. To separate the bracket from the main unit for the installation or to separate Lock Release the camera from an installed camera, push this release and turn the main unit in the marked direction of <UNLOCK>.

  • Page 14: At A Glance

    overview at a GLance (SnD-5061/SnD-7061) appearance Item Description Dome Cover Dome cover for the lens and unit protection. Main unit Main unit includes the lens, switch board, PCB boards and screws. Power Port Used to plug the power cable. BROWN = Alarm IN Used to connect the alarm input sensor. Alarm Input Port BLACK = GND Used for earth-grounding.
  • Page 15 components Item Description Focus Lever Turn it to the left or right to adjust the focus; turn it clockwise to fix the focus. Zoom Lever Used to adjust or fix the zoom factor of the lens. Using the test monitor cable, you can connect to a mobile display for camera Monitor to install test.
  • Page 16 overview Item Description Resets the camera settings to the default. Press and hold for about 5 seconds to reboot the system. If you reset the camera, the network settings will be adjusted so that Reset Button DHCP can be enabled. If there is no DHCP server in the network, you must run the IP Installer program to change the basic network settings such as IP address, Subnet mask, Gateway, etc., before you can connect to the network.

  • Page 17: Installation & Connection

    & connection inStaLLation (SnD-5011/SnD-7011) precautions before installation Ensure you read out the following instructions before installing the camera: • Select an installation site (ceiling or wall) that can endure at least 5 times of the camera weight. • Stuck-in or peeled-off cables can cause damage to the product or a fire.
  • Page 18 installation & connection 3. While pushing the ratchet toward <unLocK> direction outwards, turn the bracket to <unLocK> direction using bottom groove to separate it. installation 1. Use the provided screws (x3) to fix the bracket to a desired position (ceiling or wall). Ensure that the <FRONT>...
  • Page 19 inStaLLation (SnD-5061/SnD-7061) precautions before installation Ensure you read out the following instructions before installing the camera: • Select an installation site (ceiling or wall) that can endure at least 5 times of the camera weight. • Stuck-in or peeled-off cables can cause damage to the product or a fire. •...
  • Page 20 installation & connection 3. While pushing the ratchet toward <unLocK> direction outwards, turn the bracket to <unLocK> direction using bottom groove to separate it. installation 1. Use the provided screws (x3) to fix the bracket to a desired position (ceiling or wall). Ensure that the <FRONT>...

  • Page 21: (Snd-5011/Snd-7011)

    (SnD-5011/SnD-7011) Panning Tilting Lens rotation The part marked shaded above acts as heat sinker pad to lose the product’s heat. While powered, it gets hot and requires safety attention. ❖ adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling.
  • Page 22 installation & connection ❖ methods of adjustment • The case of wall installation ① After mounting the camera on the wall, adjust the panning angle so that the camera faces a desired direction when tilting. ② Adjust the Rotate position to fit the video to the screen borders. ③...

  • Page 23: Snd-5061/Snd-7061)

    adjusting the monitoring direction for the camera (SnD-5061/SnD-7061) Panning Tilting Lens rotation The part marked shaded above acts as heat sinker pad to lose the product’s heat. While powered, it gets hot and requires safety attention. ❖ adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling.
  • Page 24 installation & connection ❖ methods of adjustment • The case of wall installation ① After mounting the camera on the wall, adjust the panning angle so that the camera faces a desired direction when tilting. ② Adjust the Rotate position to fit the video to the screen borders. ③...

  • Page 25: Connecting With Other Device

    connectinG witH otHer Device Monitor to install Power Ethernet The BNC Out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes. If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to the product.
  • Page 26 installation & connection Be careful not to reverse the polarity when you connect the power cable. Please connect the power adapter when the installation is completed. As shown in the table below, you may encounter a voltage-sag depending on the wire length. If you use an excessively long wire for camera connection, the camera may not work properly.
  • Page 27 to connect to the alarm input port Connect the alarm input cable to the corresponding port. SENSOR Port Description Port Description ALARM IN Alarm Input Sensor Port GND port for the sensor to connect the external sensor Connect one strand of each signal line (2-strand) of the sensors to the [aLarm in] port, and connect the other strand to the [GnD] port.

  • Page 28: Network Connection And Setup

    network connection and setup You can set up the network settings according to your network configurations. connectinG tHe camera DirectLy to LocaL area networKinG connecting to the camera from a local pc in the Lan 1. Launch an Internet browser on the local PC. 2.

  • Page 29: Connecting The Camera Directly To A Dhcp

    connectinG tHe camera DirectLy to a DHcp BaSeD DSL/caBLe moDem INTERNET DSL/Cable Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 30: Modem

    network connection and setup connectinG tHe camera DirectLy to a pppoe moDem INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 31: Connecting The Camera To A Broadband Router With The

    connectinG tHe camera to a BroaDBanD router witH tHe pppoe/caBLe moDem This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband Cable Modem Cable Modem Router Camera External Remote PC DDNS Server (Data Center, KOREA) Local PC...

  • Page 32: Buttons Used In Ip Installer

    network connection and setup ButtonS uSeD in ip inStaLLer e f g Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented.

  • Page 33: Static Ip Setup

    Exits the IP Installer program. For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www.samsungcctv.com). Static ip Setup manual network Setup Run <ip installer_v2.XX.exe>...
  • Page 34 network connection and setup 3. In the <address> pane, provide the necessary information. • MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually. You can configure the static IP settings only if the DHCP checkbox is unchecked.
  • Page 35 if using a Broadband router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The <Subnet mask> of the Broadband Router will be the <Subnet mask>...

  • Page 36: Auto Network Setup

    network connection and setup auto network Setup Run <ip installer_v2.XX.exe> to display the camera search list. At the initial startup, both [auto Set] and [manual Set] will be grayed out. For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.

  • Page 37: Dynamic Ip Setup

    Dynamic ip Setup Dynamic ip environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN checking the Dynamic ip 1.

  • Page 38: Manual Port Range Forwarding

    network connection and setup port ranGe forwarD (port mappinG) Setup If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. manual port range forwarding 1.
  • Page 39 Setting up port range forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the camera.

  • Page 40: Connecting To The Camera From A Shared Local Pc

    network connection and setup connectinG to tHe camera from a SHareD LocaL pc 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera.

  • Page 41: Connecting To The Camera

    web viewer connectinG to tHe camera normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...
  • Page 42 IP when you try to access the device. To add the IP address to the <DDnS> server, visit www.samsungipolis.com and register your device, and set the DDNS option to <Samsung DDnS> before providing the product ID for the DDNS server.
  • Page 43 inStaLLinG Stw webviewer pLuGin If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. Microsoft Visual C++ 2010 Redistribute Package should be installed on the PC before you can install the Web viewer plug-in.

  • Page 44: Using The Live Screen

    web viewer uSinG tHe Live Screen Item Description Monitoring Move to the monitoring screen. Setup Move to the Setup screen. Viewer Screen Displays the Live video on the screen. Profile type You can select a profile type in <Video profile> under the <Video> setup menu. Capture Saves the snapshot as an image file in the .bmp or .jpg format.

  • Page 45: To Capture The Snapshot

    Item Description Screen The video size of the camera will switch to as big as the Web browser. Optimization Hide the context The left-corner context menu will disappear but only the menu icon. menu Use the mouse wheel to control the digital zooming. to capture the snapshot 1.

  • Page 46: Video Setup

    setup screen Setup You can configure the video, network, event and system settings of the camera via the network. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. Microsoft Sliverlight 4.0 is required to be installed on the PC for setup pages that provide preview video.
  • Page 47 5. Configure the ATC mode settings. • ATC mode : It adjusts the video properties according to the variance in the network bandwidth, controlling the bit rate. Adjusting the bit rate depends on the ATC mode. - Control framerate : Reduce the frame rate if the network bandwidth drops down. - Control compression : Control the compression rate if the network bandwidth drops down.

  • Page 48: To Add A Video Profile

    setup screen to add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select one from the <video profile> options. 2. Provide the name and select a codec. 3.
  • Page 49 what is Gop size? GOP(Group of Pictures) is a set of video frames for H.264 compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which contains one complete image data.
  • Page 50 (SnD-5011/SnD-7011) You can specify a certain area of the camera video to be protected for your privacy. 1. Set it to <on>. 2. When done, click [apply ( 3. Place the cursor at a point in the video and drag it to whatever you need.

  • Page 51: Camera Setup

    camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the <video ( )> tab. 2. Click <camera setup>. 3. Configure the settings as necessary of : White balance, Backlight, Exposure, Special, OSD, Time OSD 4.
  • Page 52 4. Set the <top, Bottom, Left, right> levels to specify the target area. exposure Setup (SnD-5011/SnD-7011) You can adjust the exposure level of the camera. 1. Select <exposure>. 2. Select each item and set it properly.
  • Page 53 • Shutter speed : Control the shutter speed manually. • SSNR : Specify the reduction level of background noise for a low contrast scene. • Sens-up mode : Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image.
  • Page 54 setup screen • Shutter speed : Control the shutter speed manually. • SSNR : Specify the reduction level of background noise for a low contrast scene. • Sens-up mode : Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image.
  • Page 55 • Sharpness mode : Adjust the overall sharpness of the image. If selecting <on>, you can adjust the sharpness of the image. • Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes. •...
  • Page 56 setup screen Smart codec setup (SnD-7011/SnD-7061) Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the <video ( )> tab. 2. Click <Smart codec setup>. 3.

  • Page 57: Network Setup

    networK Setup interface 1. From the Setup menu, select the <network ( )> tab. 2. Click <interface>. 3. Set the <interface> and <ipv6 setup> as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
  • Page 58 The default is 80(TCP). • Device port : Set a port used to transfer video signals with the Samsung protocols. • RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
  • Page 59 • Samsung DDNS : Select this if you use the DDNS server provided by Samsung Techwin. - Product ID : Enter the product ID that is registered with the Samsung DDNS service. • Public DDNS : Select one of provided public DDNS servers when you use a public DDNS server.

  • Page 60: Registering With Ddns

    DDnS to register your product with the Samsung DDnS 1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account. 2. From the top menu bar, select <DDnS Service> - <my DDnS>. 3. Click [proDuct reGiStration].
  • Page 61 Samsung DDnS in camera setup 1. From the DDNS setup page, set <DDnS> to <Samsung DDnS>. 2. Provide the <product iD> that you registered product ID with the DDNS site. 3. Click [apply ( When the connection is successfully made, you will see the message of <(Success)>...
  • Page 62 setup screen ip filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <network ( )> tab. 2. Click <ip filtering>. 3. Select <filtering type>. •...
  • Page 63 You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the <network ( )> tab. 2. Click <SSL>. 3. Select a secure connection system. To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_ IP>”.
  • Page 64 setup screen 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the <network ( )> tab. 2. Click <802.1x>. 3. Set the <ieee 802.1x Setting(eapoL using eap-tLS)>. •...
  • Page 65 You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the <network ( )> tab. 2. Click <QoS>. 3. Click the [add ( )] button. The IP list will be created. 4.

  • Page 66: Event Setup

    setup screen • Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is “admin4321”. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
  • Page 67 • E-mail configuration - Server address : Enter the IP address of the email server that you transfer the alarm or event images to. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server.

  • Page 68: Alarm Input

    setup screen alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup >. 3. Select <alarm input> from <event action setup>. 4.

  • Page 69: Time Schedule

    time schedule You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <time schedule> from <event action setup>.

  • Page 70: Tampering Detection

    setup screen tampering detection You can set to trigger an event when a scene is changed on the video screen. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <tampering detection> from <event action setup>.

  • Page 71: Motion Detection

    motion detection 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup >. 3. Select <motion detection> from <event action setup>. 4. Set whether or not to <enable>. 5. Set the motion detection mode to Mask.
  • Page 72 setup screen If the camera is capturing a short-distant object, the motion detection performance may be degraded. The motion detection function may not work properly in the following cases: - The object color or brightness is similar to the background. - Multiple movements continue occurring at random due to a scene change or other reasons.

  • Page 73: System Setup

    SyStem Setup product information 1. From the Setup menu, select the <System ( )> tab. 2. Click <product information>. 3. Check the camera information, or provide details according to your network environment. • Model : Model name of the product. •...
  • Page 74 setup screen • System time setup : Specify the time and date that will be applied to your system. - Manual : Specify the time manually. - Synchronize with NTP server : Sync with the time of the specified server address. - Synchronize with PC viewer : Synchronize the time with the connected PC.
  • Page 75 It may take a max of 20 minutes for the upgrade process. If you forcibly terminate the upgrade process, upgrade will not be completed properly. You can download the latest version from the Samsung web site (www.samsungcctv.com). English _75...
  • Page 76 setup screen to back up the current settings 1. Click [Backup]. The Save As dialog should appear. 2. Specify the backup path with a proper file name, and click [Save]. The backup file will be saved to the specified path in the format of “.bin”. to restore the backup settings 1.
  • Page 77 You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • System : You can check the system logs where any system changes are recorded including the time information.
  • Page 78 setup screen profile access You can check the profile information. 1. From the Setup menu, select the <System ( )> tab. 2. Click <profile access>. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec.
  • Page 79 Specification Description Items SND-5011 SND-5061 SND-7011 SND-7061 Imaging Device 1/3” 1.3M PS CMOS 1/2.8” 3M PS CMOS Total Pixels 1,384(H) x 1,076(V) 2,144(H) X 1,588(V) Effective Pixels 1,329(H) x 1,049(V) 2,096(H) X 1,561(V) Scanning System Progressive Color/B/W : Color/B/W :...
  • Page 80 Description Items SND-5011 SND-5061 SND-7011 SND-7061 Pan Range 0°~352° 0°~355° 0°~352° 0°~355° Pan Speed Tilt Range 0°~90° 17°~90° 0°~90° 17°~90° Tilt Speed Pan / Tilt / Rotate Rotate Range 0°~352° 0°~355° 0°~352° 0°~355° Preset Preset Accuracy Auto Tracking Camera Title Off / On (Displayed up to 15 characters) Day &...
  • Page 81 Description Items SND-5011 SND-5061 SND-7011 SND-7061 Privacy Masking Off / On (12 Rectanggular zones) Off / Auto (2X ~ 60X) Sens-up (Sens-up is limited to x30 in maximum if two or more users of different (Frame Integration) profiles are accessing at the same time.)
  • Page 82 Description Items SND-5011 SND-5061 SND-7011 SND-7061 <3M Mode> * H.264 : Max 20fps at all resolutions * MJPEG : 800x600 ~ 320x180 - 20 fps, 1280x1024 ~ 1920x1080 H.264 : 30fps - 15 fps, 2048x1536 - 10 fps Max. Framerate MJPEG : 30fps(1280x1024), <2M Mode>...
  • Page 83 Description Items SND-5011 SND-5061 SND-7011 SND-7061 TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, HTTPS, SSL, Protocol DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, ONVIF On/Off HTTPS(SSL) Login Authentication Digest Login Authentication Security IP Address Filtering User access Log 802.1x Authentication...
  • Page 84 Description Items SND-5011 SND-5061 SND-7011 SND-7061 Operating Temperature / -10°C ~ +55°C (+14°F ~ +131°F) / ~ 90%RH Humidity Environmental Storage Temperature / -30°C ~ +60°C / ~ 90%RH Humidity Ingress Protection Input Voltage / 12V DC, PoE(IEEE802.3af, Class2)

  • Page 85: Product Overview

    ❖ SnD-5011/SnD-7011 Unit : mm (inch) 107.6 (4.33") English _85...
  • Page 86 appendix ❖ SnD-5061/SnD-7061 Unit : mm (inch) Ø115.8 (4.56") 115.8 (4.56") 86_ appendix...

  • Page 87: Troubleshooting

    trouBLeSHootinG PROBLEM SOLUTION y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. I can’t access the camera from a y If connected using DHCP, verify that the camera is able to acquire web browser.
  • Page 88 For more additional information, send email to help.cctv@ 3. All advertising materials mentioning features or use of this samsung.com. software must display the following acknowledgement: This product includes software developed by the Computer copyright (c) 2004, Kneschke, incremental Science Department at University College London.
  • Page 89 License Various copyrights apply to this package, listed in various NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT separate parts below. Please make sure that you read all the OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF parts. THE POSSIBILITY OF SUCH DAMAGE.
  • Page 90 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT y Neither the name of Cisco, Inc, Beijing University of HOLDERS AND CONTRIBUTORS “AS IS” AND ANY Posts and Telecommunications, nor the names of their EXPRESS OR IMPLIED WARRANTIES, INCLUDING, contributors may be used to endorse or promote products BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF derived from this software without specific prior written MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 91 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of Apple Inc. (“Apple”) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

  • Page 92: Gnu General Public License

    Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 93 b) You must cause any work that you distribute or publish, If distribution of executable or object code is made by that in whole or in part contains or is derived from offering access to copy from a designated place, then the Program or any part thereof, to be licensed as a offering equivalent access to copy the source code from the whole at no charge to all third parties under the terms...

  • Page 94: End Of Terms And Conditions

    9. The Free Software Foundation may publish revised and/ one line to give the program’s name and an idea of what it or new versions of the General Public License from time does. to time. Such new versions will be similar in spirit to the Copyright (C)yyyy name of author present version, but may differ in detail to address new problems or concerns.
  • Page 95 We, the Free Software Foundation, use the GNU General called a “modified version” of the earlier work or a work “based Public License for most of our software; it applies also to any on” the earlier work. other work released this way by its authors. A “covered work”...
  • Page 96 the stated conditions are met. This License explicitly affirms d) If the work has interactive user interfaces, each must your unlimited permission to run the unmodified Program. display Appropriate Legal Notices; however, if the Program The output from running a covered work is covered by this has interactive interfaces that do not display Appropriate License only if the output, given its content, constitutes a Legal Notices, your work need not make them do so.
  • Page 97 doubtful cases shall be resolved in favor of coverage. For c) Prohibiting misrepresentation of the origin of that material, a particular product received by a particular user, “normally or requiring that modified versions of such material be used” refers to a typical or common use of that class of marked in reasonable ways as different from the original product, regardless of the status of the particular user or of version;...
  • Page 98 10. automatic Licensing of Downstream recipients. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring Each time you convey a covered work, the recipient conveyance of, a covered work, and grant a patent license automatically receives a license from the original licensors, to to some of the parties receiving the covered work authorizing run, modify and propagate that work, subject to this License.

  • Page 99: Gnu Lesser General Public License

    If the Program specifies that a proxy can decide which future This license, the Lesser General Public License, applies versions of the GNU General Public License can be used, to some specially designated software packages-typically that proxy’s public statement of acceptance of a version libraries-of the Free Software Foundation and other authors permanently authorizes you to choose that version for the who decide to use it.
  • Page 100 For example, on rare occasions, there may be a special need You may charge a fee for the physical act of transferring a to encourage the widest possible use of a certain library, so copy, and you may at your option offer warranty protection in that it becomes a de-facto standard.
  • Page 101 If distribution of object code is made by offering access to copy c) Accompany the work with a written offer, valid for at least from a designated place, then offering equivalent access to copy three years, to give the same user the materials specified the source code from the same place satisfies the requirement in Subsection 6a, above, for a charge no more than the to distribute the source code, even though third parties are not...

  • Page 102: How To Apply These Terms To Your New Libraries

    by court order, agreement or otherwise) that contradict NOT LIMITED TO, THE IMPLIED WARRANTIES OF the conditions of this License, they do not excuse MERCHANTABILITY AND FITNESS FOR A PARTICULAR you from the conditions of this License. If you cannot PURPOSE.
  • Page 103 openSSL LicenSe documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with Copyright (c) 1998-2006 The OpenSSL Project. All rights or without modification, are permitted provided that the reserved. Redistribution and use in source and binary forms, following conditions are met: with or without modification, are permitted provided that the 1.
  • Page 104 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 106 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

This manual is also suitable for:

Snd-7011Snd-5061Snd-7061

Table of Contents