To Set The Sensor; To Set Ssdr (Samsung Super Dynamic Range) - Samsung SND-6083 User Manual

setup screen

to Set the Sensor

It specifies how many frames the camera CMOS sensor will capture per second.
1. Select <Sensor>.
2. Select <mode>.
Refer to "Video profile" for the framerate setup range of the <Video profile> according to mode
`
M
setup. (Page 70)
If the sensor mode is set to 50 fps or 60 fps, the <Back light> mode cannot be set to <WDR>.
`

to Set SSDr (Samsung Super Dynamic range)

In a scene where the difference between bright and dark is severe, you can increase the
brightness of the dark area alone to regulate the overall brightness.
1. Select <SSDr>.
2. Set <mode> to <on>.
3. Configure the <Level> and <D-range>
settings as necessary.
• Level : Adjust the level of the dynamic range.
• D-Range : Select the amplitude area of the dynamic range.
86_ setup screen