Video Analytics - Samsung SCD-5083 User Manual

- SEL POS/ XPOS/ YPOS : Adjust the size and position of the selected area.
- RETURN : Return to the SPECIAL menu.
Dis (Digital image stabilizer) : T his function mitigates any picture movement due to


ViDEo analYTiCs


❶
If the SPECIAL menu screen is

displayed, use the Function Setup
switch so that the arrow indicates
'VIDEO ANALYTICS'.
❷ Select a desired mode using the
Function Setup switch.
- TAMPERING : If the screen view
SENSITIVITY : Set the sensitivity to tampering detection.

ALARM OUT : Outputting of detection signals can be set.

EXTERNAL : Send signals through external terminals.
OSD : Display signals on the screen.
RETURN : Return to the TAMPERING menu.
RETURN : Return to the VIDEO ANALYTICS menu.

M
In the following cases, the initially set tampering detection function can malfunction.
- In a monitoring environment with a simple background or an environment with low light level or at
night, the detection performance can deteriorate.
- Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering.
- Immediately after tampering, the camera tampering detection can take up to a max of five seconds.
- If camera tampering is detected, after some time(five sec), stabilization will be done before
restarting. During stabilization, there is no detection.
external factors such as wind.
is obstructed or the
camera location
is changed,
tampering
detection, you can
issue an event signal by setting it.
VIDEO ANALYTICS
▶ 1. TAMPERING
2. MOTION
3. INTELLIGENCE
RETURN
4.
TAMPERING
SENSITIVITY
▶ 1.
ALARM OUT
2.
RETURN
3.
OFF
OFF
OFF
MIDDLE
English_2