Event Setup - Samsung SND-6083 User Manual

setup screen
5. Type in each item in the Port menu as necessary.
Neither the port range between 0 and 1023 nor port 3702 is available.
`
• HTTP : HTTP port used to access the camera via the web browser.
The default is 80(TCP).
Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security
`
policy.
• HTTPS : In this version, the security of the web communication protocol HTTP is
strengthened. It can be used when you set HTTPS mode in SSL.
The initial value is set to 443(TCP).
The available setting range is 1024~65535. (For security reasons, in your Safari or Google Chrome
`
browser, you may not use 65535 as your HTTPS port.)
• RTSP : Used to transfer videos in the RTSP mode; the default is 554.
• Use timeout : When connecting to RTSP, this function resets the connection if
there's no response for a certain time.
• Device port : Set a port used to transfer video signals with the Samsung
protocols.
If changed the HTTP port, the browser exits.
M `
Afterwards, address should contain the newly assigned HTTP port trailing the IP.
ex) IP address: 192.168.1.100, HTTP port : Assigned 8080  http://192.168.1.100:8080
(If HTTP port is set to 80, no need to specify the port number)
Using RTSP and HTTPS is recommended in order to prevent the image information from being
`
restored.
6. When done, click [apply (

event setup

You can easily set the event detection items, and move to the detailed setting.
1. From the Setup menu, select the
<Basic (
2. Click <event setup>.
3. Activate desired items on the Event list.
4. When done, click [apply (
To make detailed event settings, click on
`
M
your desired settings. Go to detailed <Event> setting.
80_ setup screen
)> tab.
)].
)].