Sanyo PLC-HF15000L Service Manual page 65

Optical Adjustment
v Integrator and PBS adjustment-2
1
Move the integrator-(OUT)/PBS and integrator(IN) to remove the
color bands on the top/bottom or left/right of the screen.
1) To adjust the image horizontally as shown in Fig.4-1, move the
c
slot by using a slot screwdriver.
) To adjust the image vertically as shown in Fig.4-2, turn the screw
F
by using a hex driver.
2
A, B
Tighten screws
Integrator(IN) unit.
Fig.4-1
c
A
After completing the optical center adjustment, replace the optical adjustment tools with the polarized
glass/optical filter assy and connect the Lcd panel cables and connectors on the main board.
d
and to fix the Integrator(OUT)/PBS and
B
(Bottom)
(Target screen image)
-65-
Fig.4-2
F
d