Resetting The Filter Counter - Sanyo PLC-HF15000L Service Manual

Maintenance

Resetting the Filter counter

Be sure to reset the filter counter after replacing the filters.
1
Press the MENU button to display the On-Screen Menu.
Use the Point ed buttons to select [Setting] and then
press the Point 8 button or the SELECT button.
2
Use the Point ed buttons to select [Filter counter] and
the press the SELECT button. Use the Point ed buttons
to select [Filter counter reset] and the press the SELECT
button. Filter counter Reset? appears. Select [Yes] to
continue.
3
Another confirmation dialog box appears, select [Yes] to
reset the Filter counter.
✔Note:
• Whenever the filters have been replaced, reset the Filter
counter, but if the filters were not replaced, do not reset
the filter counter, as this could cause product damage.
Filter counter
-11-
Select "Used time" and the dia-
logue box below appears.
"Filter counter Reset?"
appears.
Select [Yes], then
another confirmation box
appears.
Select [Yes] again to
reset the Filter counter.