Sanyo PLC-HF15000L Service Manual page 28

Mechanical Disassembly
3-5 AMC unit disassembly-5
1 Remove 8 screws-A (T3x8) to remove the mesh filter.
 Remove 1 screw-B (T3x8) and press and slide the flat cable cover in the arrow direc-
tion as shown in the figure.
3 Remove each  screws-C (T3x8), screws-D (T3x1) to remove the base link unit,
sensor switch and AMC socket.
Sensor
switch
AMC socket
Sensor
switch
A
Flat cable cover
B
Base link unit
c
d
d
Put the wires through the
grooves. Not to pinch the wires
with the cover.
A
A A
Mesh filter
A
A
A
Flat cable
c
-8-
A
Sensor
switch
Flat Cable
Sensor
switch