Sanyo PLC-HF15000L Service Manual page 182

Troubleshooting
the projector is detecting abnormal condition.
Indicators
WARNING
POWER LAMP
TEMP.
green red
red
✽
Fig.1
Fig.2
✽ ✽ ✽
WARNING LAMP
SHUTTER
FILTER REP.
blue
orange orange
✽ ✽
✽ ✽
✽
✽ ✽
Projector condition
If the Filter counter reaches a time set in the timer set-
ting, the icon shown in Fig.1 appears on the screen
and the WARNING FILTER indicator on the top panel
lights up.
If the Filter counter remaining reaches 0% or the
filter is clogged, the icon shown in Fig. appears on
the screen and the WARNING FILTER indicator lights
up. Replace the filter as soon as possible.
Note:
✔
• Fig.1 and Fig. icon will not appear when the Display
function is set to "Off" , or during "Freeze".
The projector detects an abnormal condition and
cannot be turned on. Unplug the AC power cord and
plug it again to turn on the projector. If the projector
is turned off again, unplug the AC power cord and
contact the dealer or the service center. Do not leave
the projector on. It may cause an electric shock or a
fire hazard.
The shutter is out of control.
The shutter is out of control. (The projector is in the
cooling mode.)
The shutter is out of control. (The projector is in the
stand-by mode.)
-18-