Sanyo PLC-HF15000L Service Manual page 48

Optical Parts Disassembly
3 Polarized glass(IN)/Optical filter assy removal
Remove  screws-A (M.6x6) on each stopper and take the polarized glasses up-
ward off.
* Note on handling the polarized glass (IN) assy
Care the following points to maintain the Polarized glass (IN)
assy.
- When removing the dust on the outer surface of the Polarized
glass (IN) assy, wipe with the soft cloth gently.
- When removing the dust on the inner surface of the Polarized
glass (IN) assy, The inner surface of the Polarized glass(IN/
R)1, Polarized glass(IN/B)1 and Polarized glass(IN/G)1 have
a very sensitive surface. Never touch or wipe the surfaces.
When removing the dust, use a commercial (inert gas) air
spray to remove them. Never use organic solvents. Grab the
edge of the glass by new gloves when handling the polarized
glass.
A
A
A
Polarized glass(IN)/
Optical filter assy
-48-
Never touch or wipe
the surface here
(M3x6)
Polarized glass (IN)
assy
Optical filter (ICV) assy
Polarized
glass (IN)1