Sanyo PLC-HF15000L Service Manual page 30

Mechanical Disassembly
4 Main, RC rear board and Shutter removal
1 Remove 8 screws-A (M3x6) to remove the main board.
 Remove  screws-B (M4x6) to remove the shutter assy.
3 Remove 1 screw-C (T3x8) to remove the RC rear board
Shutter assy
Main board
Mounting
connector
Mother board
Confirm connectors
on the boards are
connected firmly
A
A
A
A
A
A
B
B
Note on mounting the Main board
After mounting the main board, confirm that the connectors
on the boards are connected firmly on the following points.
-30-
Main board
A
c c
A
RC rear board
Main board
Bridge board