Table of Contents
Advertisement
Move the selection marker with
the æ or ç button to the
ING
submenu.
Press button j or k repeatedly
until you see this message in the dis-
play:
.
LOCATOR LIGHTING
The selection marker is on the current
setting.
Press æ or ç to select the de-
sired setting.
The locator lighting will be switched
or
OFF
.
Setting night security illumination
LIGHT-
(Exterior lamps delayed switch-off)
Use the
HEADLAMPS DELAYED SWITCH-OFF
function to set whether and for how long
you would like the exterior lamps to illumi-
nate during darkness after all doors are
closed. When the delayed switch-off fea-
ture is activated and the exterior lamp
switch is in position U before the en-
gine is turned off, the following lamps will
remain lit after you remove the SmartKey
from the starter switch:
Parking lamps
Tail lamps
License plate lamps
Front fog lamps
ON
Controls in detail
Control system
i
You can reactivate this function within
ten minutes by opening a door.
If you do not open a door after remov-
ing the SmartKey, the lamps will auto-
matically switch off after 60 seconds.
To activate night security illumination:
Select delayed switch-off period (see
below).
Turn the exterior lamp switch to
position U before turning off the en-
gine.
To select delayed switch-off period:
Move the selection marker with
the æ or ç button to the
ING
submenu.
Press button j or k repeatedly
until you see this message in the dis-
play:
HEADLAMPS DELAYED SWITCH-OFF
The selection marker is on the current
setting.
LIGHT-
.
157
Advertisement
Table of Contents
