Table of Contents
Advertisement
Practical hints
Replacing bulbs
Rear lamps
Lamp
Type
8 Brake lamp
LED
9 Turn signal lamp
PY 21 W
a Tail and standing
P 21/4 W
lamp, side marker
b Backup lamp
P 21 W
c License plate lamps C 5 W
d Tail lamp, Rear fog
P 21/4 W
lamp
e High mounted brake
LED
lamp
354
Notes on bulb replacement
Warning!
Keep bulbs out of reach of children.
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Halogen lamps contain pressurized gas. A
bulb can explode if you:
touch or move it when hot
drop the bulb
scratch the bulb
Wear eye and hand protection.
Because of high voltage in Bi-Xenon lamps,
it is dangerous to replace the bulb or repair
the lamp and its components. We recom-
mend that you have such work done by a
qualified technician.
Only use 12 volt bulbs of the same type
and with the specified watt rating.
G
Switch lights off before changing a bulb
to prevent short circuits.
Always use a clean lint-free cloth when
handling bulbs.
Your hands should be dry and free of oil
and grease.
If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Center.
Have the LEDs and bulbs for the follow-
ing lamps replaced by an authorized
Mercedes-Benz Center.
Additional turn signal lamps in the
exterior rear view mirrors
High mounted brake lamp
Bi-Xenon lamps*
Front fog lamps
Advertisement
Table of Contents
