Heat & Glo CERONA-36 Owner's Manual page 54

STEP 3.
LOG #3 2107-703
(SRV
Place the notch on the tip of log #3 over
the locating tab on log #1. Place the left
leg of the log on the far left grate tine (A).
See Figure 4.
STEP 4.
LOG #4 (SRV2107-704):
Place the left formed end of log #4 on the
burner detail located under log #3, and
the notch on the right end of log #4 on
the front grate bar. Log #3 may need to
be adjusted for proper placement. See
Figure 5.
STEP 5.
LOG #5 (SRV2107-705):
Place log #5 on the left side between the
grate tine and fi rebox. Note: This log will
be used to support log #6. See Figure 6.
54
):
Figure 4.
Figure 5.
Figure 6.
Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. W • 9/15
TAB TAB
A A
3 3
NOTCH FITS NOTCH FITS
ON BURNER ON BURNER
DETAIL DETAIL
NOTCH FITS OVER FRONT GRATE BAR NOTCH FITS OVER FRONT GRATE BAR
5 5
4 4