Table of Contents
Advertisement
Controls in detail
Control system
i
For more information on satellite radio
operation, see "Introduction to satellite
radio* (USA only)" ( page 220).
Vehicles with COMAND*: Refer to
separate operating instructions.
Operate the CD player
Turn on the radio and select CD or
CD changer* ( page 228). Vehicles
with COMAND*: Refer to separate
operating instructions.
Press button è or ÿ repeatedly
until the settings for the CD currently
being played appear in the multifunc-
tion display.
150
1 Current CD (with additional number
from 1 to 6 when running from
CD changer*)
2 Current track
Press button k or j repeatedly
until the desired track is selected.
i
To select a CD from the CD changer*
magazine, press a number on the audio
system or the COMAND* system key
pad located in the center dashboard.
For more information on CD operation, see
"CD mode" ( page 225) and for the
CD changer*, see "CD changer*"
( page 228).
NAV* menu
The
Nav
menu contains the functions
needed to operate your navigation system.
Press button è or ÿ repeatedly
until the message
Nav
appears in the
multifunction display.
If COMAND* is switched off, the mes-
sage
Nav off
appears in the multifunc-
tion display.
With COMAND* switched on but route
guidance not activated, the direction of
travel and, if available, the name of the
street currently traveld on appear in
the multifunction display.
With COMAND* switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
Advertisement
Table of Contents
