Table of Contents
Advertisement
Operating the CD player
Selecting CD track
Turn on the COMAND system and
select CD. Refer to separate COMAND
system operating instructions.
Press button è or ÿ repeatedly
until the settings for the CD currently
being played appear in the multifunc-
tion display.
1 Current CD (for CD changer*)
2 Current track
Press button k or j repeatedly
until the desired track is selected.
i
Vehicles with CD changer*: To select a CD
from the magazine, press a number on the
COMAND system key pad located in the center
console.
Selecting MP3-CD track
Turn on the COMAND system and
select MP3. Refer to separate
COMAND system operating
instructions.
Press button è or ÿ repeatedly
until the settings for the MP3-CD cur-
rently being played appear in the multi-
function display.
1 MP3 mode
2 Current track
Press button k or j repeatedly
until the desired track is selected.
Controls in detail
Control system
NAV menu*
The
NAV
menu contains the functions
needed to operate your navigation system.
Press button è or ÿ repeatedly
until the message
NAV
appears in the
multifunction display.
The message shown in the multifunction
display depends on the status of the navi-
gation system:
With the COMAND system switched
off, the message
NAV off
the multifunction display.
With the COMAND system switched on
but route guidance not activated, the
direction of travel and, if applicable, the
name of the street currently traveled
on appear in the multifunction display.
appears in
167
Advertisement
Table of Contents
