Settings Menu - Mercedes-Benz 2006 CLK-Class Coupe Operator's Manual

Controls in detail
Control system
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch. With
KEYLESS-GO*, turn off the engine by
pressing the KEYLESS-GO* start/stop
button and open the driver's door.
i
The vehicle status message memory
will be cleared when you switch on the
ignition ( page 36). You will then only
see high-priority messages in the multi-
function display ( page 370).
152

Settings menu

In the Settings menu there are two
functions:
The function Reset to factory
settings? , with which you can reset all
the settings to the original factory
settings.
A collection of submenus with which
you can make individual settings for
your vehicle.
Press button è or ÿ repeatedly
until the Settings menu appears in the
multifunction display.
Resetting all settings
You can reset all the functions of all
submenus to the factory settings.
Press the reset button in the
instrument cluster ( page 140) for
approximately three seconds.
The request to press the reset button
once more to confirm appears in the
multifunction display.
Press the reset button once more.
The functions of all the submenus will
reset to factory settings.