Table of Contents
Advertisement
Practical hints
Unlocking/locking in an emergency
Manually unlocking the gear selector
lever
In case of power failure, the gear selector
lever can be manually unlocked, e.g. to tow
the vehicle.
i
The gear selector lever is locked again
when moving it to position P.
Center armrest design A
Open the storage compartment under
the center armrest ( page 271).
Take out storage box 1.
406
Insert a tool 2 (e.g. flat blade screw-
driver) into the opening.
Perform the following two steps simul-
taneously:
Push tool 2 forward in the direc-
tion of the arrow.
Move gear selector lever from
position P.
Reinstall the storage box 1 after re-
moving the tool 2 from the opening.
Center armrest design B
Pull the tab 1 of the covering back in
direction of the center armrest com-
partment.
Insert a tool 2 (e.g. flat blade screw-
driver) into the opening.
Perform the following two steps simul-
taneously:
Push tool 2 down- and forward in
the direction of the arrow.
Move gear selector lever from
position P.
Remove the tool 2 from the opening.
Push the tab 1 of the covering back.
Advertisement
Table of Contents
