Controls in detail
Control system
Setting time (minutes)
This function can only be seen with audio
system.
i
Vehicles with COMAND*:
For information on setting the time in
COMAND, refer to the separate
COMAND operating instructions.
Move the selection marker with
button æ or ç to the
submenu.
158
Press button j or k repeatedly
until the message
Confirm by press. R
multifunction display.
The selection marker is on the minutes
setting.
Time/Date
Press button æ or ç to set the
minutes.
Press the reset button in the instru-
ment cluster ( page 140) to confirm.
The minutes are set and stored.
Setting the date (month)
Clock, minutes
This function can only be seen with audio
appears in the
system.
i
Vehicles with COMAND*:
For information on setting the date in
COMAND, refer to the separate
COMAND operating instructions.
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until the message
appears in the multifunction display.
The selection marker is on the month
setting.
Time/Date
Set date month