Table of Contents
Advertisement
Controls in detail
Control system
Lighting submenu
Access the
Lighting
submenu via the
tings
menu. Use the
Lighting
to change the lamp and lighting settings on
your vehicle.
The following functions are available:
Function
Setting daytime running lamp
mode (USA only)
Setting locator lighting
Exterior lamps delayed
switch-off
Interior lighting delayed
switch-off
160
Setting daytime running lamp mode
(USA only)
Set-
submenu
i
This function is not available in
countries where the daytime running
lamp mode is mandatory and therefore
in a constant mode.
Page
160
Move the selection marker with
button æ or ç to the
161
submenu.
162
Press button j or k repeatedly
until the message
headlamp
appears in the multifunction
163
display.
The selection marker is on the current
setting.
Press button æ or ç to select
manual operation (
Lighting
running lamp mode (
ed.
With daytime running lamp mode activated
Lamp circuit
and the exterior lamp switch in
position M or U the low beam
headlamps are switched on when the
engine is running.
In low ambient light conditions the
following lamps will switch on additionally:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
manual
) or daytime
constant
) activat-
Advertisement
Table of Contents
