SmartKey with KEYLESS-GO*
Replacement batteries: Lithium, type
CR 2025 or equivalent.
Remove the mechanical key
( page 404).
Insert the mechanical key in side open-
ing and push grey slide ( page 410).
The battery compartment is unlatched.
Pull the battery compartment out of the
housing ( page 410).
1 Battery
2 Tilt battery up
3 Mechanical key
Using mechanical key 3, apply
pressure to position 2.
Battery 1 tilts up slightly.
Pull batteries 1 out in the direction of
arrow.
Practical hints
Replacing SmartKey batteries
Using a lint-free cloth, insert new
batteries 1 under the contact spring
with the positive terminal (+) side
facing up.
Return battery compartment into hous-
ing until it locks into place.
Slide mechanical key 3 back into the
SmartKey.
Check the operation of the SmartKey
and the KEYLESS-GO*.
411