Toshiba Satellite A40 Series Maintenance Manual page 346

4 Replacement Procedure
4.26.3 Replacing the 14.1 Inch XGA TMD Fluorescent lamp
The following describes the procedure for replacing the fluorescent lamp (See Figure 4-63 to
Figure 4-74)
Disassembling Fluorescent lamp
Peeling off the tapes and insulation sheets
1. Flip the module over and place it on a flat surface that is free of foreign objects.
2. In the order (1), (2), and (3) shown in Figure 4-63, remove the tape for fixing the FL
tube cable, two pieces of tape on the bezel that are close to the FL tube, and the X-
PCB insulation sheet.
CAUTION: (1) Be careful not to damage the TAB.
(2) Leave the insulation sheet on the bezel to allow the reuse of the sheet.
>P C- GF 1 3 <
1
Figure 4-63 Replacing 14 Inch TMD fluorescent lamp (1)
4-80
Ｆ Ｌ破棄 ラベル
Label (cautions for disposal of FL tubes)
2 2
4.26 Fluorescent lamp
Product label 製品 ラベル
3
Ｂ Ｌ Ｓ／Ｎ ラベル
BL S/N label
Satellite A40 Maintenance Manual (960-458)