3 Tests and Diagnostics
Press 0 to select the test and press Enter in the target machine. The following message will
appear:
##############################################################
####
##############################################################
*
*
*
*
*
*
*
**************************************************************
....Press test number [1-2,0]
======== RESPONDER SET ========
ORiWL.EXE Rev.03 Copyright (c) Toshiba Corporation,2000, 2001
Initializing...
[[[ Responder Mode ]]]
MAC address : XXXXXXXXXXXX
Ad-hoc mode
SS ID : PHN Test
Channel : 10
Tx ratio : 2 Mbps
When the machine has passed the test, "OK" message will appear in the target machine.
Then press Enter in the test machine; the "OK" message will appear also in the test
machine.
Press Enter to return to the main menu.
Subtest 02
Mac Address test
This subtest reads Mac Address. If there is no problem, the "OK" message
will appear.
Subtest 03
Wireless LAN (WEP64/128) test
This subtest reads the WEP of the wireless LAN card installed in the target
machine. A message similar to the following will appear:
****** This CARD is WEP ******
Press any key to continue
3-72
Wireless LAN sub system repair test
1
Transmit & Receive test [Responder]
2
MAC Address test [Mini-PCI Wireless LAN]
3
Wireless LAN (WEP64/128) test
0
Transmit & Receive test [Initiator]
3.25 Wireless LAN Test Program (Agere)
VX.XX
?1
Satellite A40 Maintenance Manual (960-458)
####
*
*
*
*
*
*
*