Toshiba Satellite A40 Series Maintenance Manual page 286

4.26 Fluorescent lamp
4. Turn the LCD module face down. Remove four screws fixing the board and remove
the FPC (G). Open the bent portion of the TCP of the board and remove the backlight.
Screw
Figure 4-132 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (4)
Do not hold the edge.
Figure 4-133 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (5)
Satellite A40 Maintenance Manual (960-458)
Screw loosening torque: 0.9kg•cm
Open the cap of the connector and
remove the FPC.
Raise the board and make this condition.
4 Replacement Procedures
(G) FPC
Do not hold the edge.
Screw
Screw
Screw
4-135