Toshiba Satellite A40 Series Maintenance Manual page 296

4.26 Fluorescent lamp
8. Install the bezel (E) on the lamp cover. Attach four latches on the lamp cover and two
latches on the P-chassis.
(E) Bezel
(2) Lean the bezel on the lamp cover
without interference with the TCP.
Figure 4-148 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (20)
Figure 4-149 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (21)
Satellite A40 Maintenance Manual (960-458)
(1) Hitch the hook of the bezel
on the rib of the P-chassis.
Make sure of mating of the bezel and the rib of the P-chassis.
Make sure of mating of the bezel and the latch of
the P-chassis.
Make sure of mating of the bezel
and the latch of the P-chassis.
4 Replacement Procedures
< Side view >
Hook
(Lamp cover side)
4-145