Toshiba Satellite A40 Series Maintenance Manual page 277

4 Replacement Procedures
Installing the Hinge
To install the hinge, follow the steps below and refer to figures 4-37 to 4-45.
1. Install the LCD latch knob and LCD latch hook. Be careful not to lose the spring.
2. Set both the hinges on the base side and secure them with the following screws.
• M2.5×6
3. Secure the hinges on the display cover with the following screws.
• M2.5×4B
• M2.5×6
4-68
Tapping screw
FLAT HEAD screw
Tapping screw
×4
×2
×2
Satellite A40 Maintenance Manual (960-458)
4.25 Hinge