Volvo XC90 Owner's Manual page 241

10 Infotainment system
Radio functions
PTY standby
In order to deactivate
menu and select CLEAR ALL PTY
10
bol PTY disappears from the display and the
radio resumes normal mode.
Traffic information – TP STATION
Here, you set from which station traffic infor-
mation is to be heeded.
Note that must be shown in the display
for this to work.
Activating/deactivating TP STATION
Listen to the station from which traffic informa-
tion is to be heeded.
1. Select RADIO SETTINGS
press ENTER.
2. Select TP and press ENTER.
3. Select TP STATION
4. Select SET CURRENT
RESET CURRENT
press ENTER.
NOTE
Now only traffic information from the stored
station will by played.
240
News – NEWS STATION
, enter the
. The sym-
Here, you set from which station news is to be
heeded.
Note that the set station in question must be an
RDS station for this to work.
Activating/deactivating NEWS STATION
Listen to the station from which news is to be
heeded.
1. Select
press ENTER.
2. Select
ENTER.
3. Select
in the menu and
4. Select
RESET CURRENT
press ENTER.
and press ENTER.
to activate or
Now only news from the stored station will
to deactivate and
by played.
RADIO SETTINGS in the menu and
NEWS STATION and press
TP STATION and press ENTER.
SET CURRENT to activate or
to deactivate and
NOTE
Automatic frequency update – AF
The AF function selects one of the strongest
transmitters for a set station. The radio may
sometimes need to search through the entire
FM wavelength to find a strong transmitter. If
this occurs, the radio mutes and
PRESS EXIT TO CANCEL appears in the dis-
play.
Activating/deactivating AF
1. Select RADIO SETTINGS in the menu and
press ENTER.
2. Select AF and press ENTER.
To reactivate AF, select AF and press
ENTER.
Regional radio programmes – REG
This function causes the radio to continue with
a regional transmitter even if its signal strength
is low.
1. Select RADIO SETTINGS in the menu and
press ENTER.
2. Select REGIONAL and press ENTER.
3.
REG appears on the display.
4. To deactivate the REG , select REG again
and press ENTER.
PI SEEK