Volvo XC90 Owner's Manual page 238

is no station with an adequately strong signal
then the display shows NO AST FOUND
Cancelling automatic storage of stations
Press EXIT.
Selecting an autostored preset
Allowing the radio to remain in Auto mode pro-
vides access to the autostored presets.
1. Briefly press AUTO (1).
AUTO
the display.
2. Press one of the 0 - 9 buttons.
3. The radio remains in Auto mode until it is
exited by a brief press on AUTO (1), EXIT
or AM/FM.
Scanning
SCAN (2) automatically searches through a
wavelength for strong stations. When a station
is found, it is played for approx. 8 seconds
before scanning is resumed.
Activating/deactivating Scan
1. Select wavelength using AM/FM.
2. Press SCAN (2) to activate. SCAN
in the display.
3. Close using SCAN or EXIT.
Storing a station
.
A selected station can be stored as a preset
while SCAN is active.
Press one of the 0 - 9 buttons and hold it
depressed until the message
stored appears on the display.
SCAN is interrupted and the stored station can
be selected as a preset.
appears in
RDS functions
RDS (Radio Data System) links FM transmitters
into a network. An FM transmitter in such a
network sends information that gives an RDS
radio the following functions:
•
Automatically switches to a stronger trans-
mitter if reception in the area is poor.
•
Searches for programme form, such as
traffic information or news.
•
Receives text information on the current
radio programme.
NOTE
Some radio stations do not use RDS or only
appears
a selected range of its functions.
10 Infotainment system
Volume control – NEWS/TP/ALARM
NOTE
If a CD for example is playing when the radio
Station receives a traffic bulletin, the CD player is
put in pause mode. The message is played
at the volume selected for that type of mes-
sage. Playback of the originally selected
audio source is then resumed at the previ-
ous volume. If volume is adjusted while the
bulletin is played, the new volume is saved
and used for the next bulletin.
News – NEWS
This function interrupts other sound sources,
e.g. CD, when a news broadcast starts.
1. Select radio mode using the SELECTOR
knob or the AM/FM button.
2. Select NEWS
ENTER.
3. NEWS appears on the display.
4. Select NEWS
deactivate the
With this function, programmes from RDS sta-
tions that are news-coded will interrupt other
audio sources using the volume setting for this
specific purpose. As soon as the news broad-
cast is finished, the audio system returns to the
Radio functions
in the menu and press
again and press ENTER to
NEWS
function.
237
10