Volvo XC90 Owner's Manual page 209

09 Maintenance and service
Replacing bulbs
09
Location of bulbs in front lamp
Dipped beam
Main beam
Direction indicator
Parking/position lamps
Side marker lamps
208
Dipped beam, halogen
1. Undo the outer cover by turning it anti-
clockwise.
2. Unplug the connector.
3. Disconnect the spring clamp. First push to
the right so that the spring clamp discon-
nects, then out and down.
4. Pull out the lamp.
5. Fit the new bulb. It can only fit in one posi-
tion.
6. Press the clamp spring upwards and a little
to the left so that it secures in its catch.
7. Press the connector back in place.
8. Screw the cover back into place; the mark-
ing HAUT should be at the top.
Main beam
Halogen and Bi-Xenon headlamps
1. Undo the outer cover by pulling it straight
out and then unplug the connector.
2. Disconnect the spring clamp. First push to
the right so that the spring clamp discon-
nects, then out and down.
3. Pull out the lamp.
4. Fit the new bulb. It can only fit in one posi-
tion.