Volvo XC90 Owner's Manual page 109

04 Interior
Cargo area
Fit the protective grille as follows:
1. Lift in the protective grille through the tail-
gate opening or one of the rear doorways
(fold down the seats in the second row if
necessary).
2. Insert one of the protective grille mountings
in its bracket above the rear door behind
the second row of seats.
04
3. Slide the protective grille mounting to the
front position of the bracket.
4. Place the other protective grille mounting
in its bracket above the other rear door and
slide it to the front position.
108
5. Insert the attaching brace through the
lower mounting in the protective grille from
underneath, as indicated in the illustration.
6. Fit the spring on the attaching brace and
screw in the knob.
7. Fit the hook from the attaching brace in the
load securing eyelet and tighten the knob
until the attaching brace takes hold in the
load securing eyelet.
8. Do the same on the other side.
9. Tighten both attaching braces alternately.
10. Fit protective caps on the exposed screw
threads above the knobs.
WARNING
For cars seating seven: For reasons of
safety, no passengers should sit in the third
row of seats if the protective grille is posi-
tioned behind the second row of seats.
Electrical socket in cargo area
Slide down the cover when you wish to use the
socket. It works regardless of whether the igni-
tion is on or off.
If the ignition is switched off and a power con-
sumer that uses more than 0.1 A is connected
to the electric socket, a warning message is
shown in the display.
NOTE
Remember not to use the electric socket
with the engine switched off as there is a risk
of the battery becoming discharged.