Volvo XC90 Owner's Manual page 175

07 Wheels and tyres
Warning triangle* and spare wheel*
Spare wheel – removing
The spare wheel is located under the car. The
jack*, tool kit* and crank are located under the
floor hatch. The crank is in two parts. One part
is in the tool kit, and the other is under the tool
kit.
NOTE
07
There is a puller spanner in the tool kit to
remove the hub cap (certain wheel options).
The location of the jack varies:
Cars seating seven
Cars seating five
*
174
Option/accessory, for more information, see Introduction.
Proceed as follows to release the spare wheel:
1. Lower the bottom of the tailgate and lift up
the floor hatch in the cargo area.
2. Take the two parts of the crank and assem-
ble.
3. Fit the crank in the winch.
4. Loosen the tyre by cranking anticlockwise
until you reach the stop.
NOTE
The cable could damage the car if it hangs
free while driving.
5. Release the wheel from the cable and wind
up the cable clockwise.
6. Place the punctured tyre in the cargo area.
The tool kit contains a plastic bag for the
tyre.