Volvo XC90 Owner's Manual page 148

Activating/deactivating
Button for activating/deactivating.
BLIS is activated when the engine is started.
The indicator lamps in the door panels flash
three times when BLIS is activated.
The system can be deactivated/activated by
pressing BLIS.
When BLIS is deactivated the light in the button
goes out and a text message is shown on the
instrument panel display.
When BLIS is activated the light in the button
illuminates, a new text message is shown on
the display and the indicator lamps in the door
panels flash three times. Press the READ but-
ton to clear the text message. For more infor-
mation on messages, see page 50.
BLIS system message
Text on the dis- Specification
A
play
BLIND-SPOT INFO BLIS system on
SYSTEM ON
BLIND-SPOT BLIS not functioning
SYST SERVICE
REQUIRED
BLIS REDUCED The BLIS camera is
disrupted by fog or
FUNCTION
strong sunlight shin-
ing directly into the
camera. The camera
resets itself when
the environment has
returned to normal.
BLIND-SPOT Right-hand camera
blocked
SYST R CAMERA
BLOCKED
BLIND-SPOT Left-hand camera
blocked
SYST L CAMERA
BLOCKED
06 Starting and driving
Blind Spot Information System - BLIS*
Text on the dis-
A
play
BLIND-SPOT
SYST CAMERAS
BLOCKED
BLIND-SPOT INFO
SYSTEM OFF
A
Messages above are only shown if the ignition key is in posi-
tion II (or if the engine is running) and BLIS is active (i.e. if
the driver has not switched off the system).
IMPORTANT
Repair of the BLIS system components
must only be performed by an authorised
Volvo workshop.
Limitations
In some situations the BLIS indicator lamp may
illuminate despite there being no other vehicle
within the blind spot.
*
Option/accessory, for more information, see Introduction.
Specification
One or both cam-
eras blocked
BLIS system off
06
147