Memory Module - HP Pavilion x360 Convertible Maintenance And Service Manual

Hide thumbs Also See for Pavilion x360 Convertible:
Table of Contents

Advertisement

Memory module

Description
8-GB (DDR3L-1600)
4-GB (DDR3L-1600)
IMPORTANT:
Before removing a memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the top cover (see
5.
Remove the system board (see
To remove a memory module:
1.
Remove the memory shielding.
2.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
3.
Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
42
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
The memory modules are not customer replaceable.
Top cover on page
System board on page
25).
39).
Spare part number
693374-005
691740-005

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents