System Board - HP Pavilion x360 Convertible Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
System board for use in models equipped with:
Intel CoreT M-5Y10C processor and the Windows 8.1 Standard operating system
Intel CoreT M-5Y10C processor and a non-Windows 8 operating system
Intel Pentium N3700 processor and the Windows 8.1 Standard operating system
Intel Pentium N3700 processor and a non-Windows 8 operating system
Intel Celeron N3050 processor and the Windows 8.1 Standard operating system
Intel Celeron N3050 processor and a non-Windows 8 operating system
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
5. Disconnect the battery.
NOTE: When replacing the system board, be sure that the following components (as necessary) are
removed from the defective system board and installed on the replacement system board:
●
WLAN module (see
●
Solid-state drive (see
●
Heat sink (see
Top cover on page
WLAN module on page
Solid-state drive (M.2) on page
Heat sink on page 44)
25).
43)
31)
Component replacement procedures
Spare part
number
809560-501
809560-001
809557-501
809557-001
809556-501
809556-001
39