c.
Rotate the top of the hinges inward so that the hinges are at an angle, (1), and then remove the
hinges (2).
4.
To remove the display hinge covers:
NOTE:
The display hinge covers are available using spare part number 809541-001 for red models,
809540-001 for silver models, 809542-001 for green models, and 809828-001 for purple models.
a.
Remove the Phillips PM2.0×3.0 screw (1) that secures the hinge cover to the hinge.
b.
Separate the hinge cover from the hinge (2).
5.
To remove the display cable:
NOTE:
The display cable is available using spare part number 809576-001.
Remove the cable from the tape and clips (1) that secure it to the display enclosure, and then lift
▲
the display cable from the display enclosure (2).
Component replacement procedures
53