Heat Sink - HP Pavilion x360 Convertible Maintenance And Service Manual

Heat sink

Description
Heat sink for use in models with Intel Core processors (includes replacement thermal material)
Heat sink for use in models with Intel Pentium and Celeron processors (includes replacement thermal
material)
Before removing the heat sink, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
5. Remove the system board (see
Remove the heat sink:
1. Following the 1 through 4 sequence stamped into the heat sink, loosen the four captive Phillips screws
(1) that secure the heat sink to the system board.
44 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Top cover on page 25).
System board on page 39).
Spare part number
809536-001
819788-001