Bluet Oot H And 802.11G Com M Unicat Ions; Magnet Ic St Rip Reader - Datamax APEX 3 User Manual

3 .5 Blu e t oot h a n d 8 0 2 .1 1 g Com m u n ica t ion s

Bluet oot h and 802.11g operat ion:
o
Dip Swit ch # 1 m ust be in t he < OFF> posit ion.
o
Dip Swit ch # 2 m ust be in t he < ON> posit ion.
Not e: Adj ust baud rat e set t ings t o m at ch t hose of t he Bluet oot h™ or 802.11g m odule in
your com put ing device.


The print er can be powered ON by pressing t he pow er < ON/ OFF> sw it ch.
Pressing t he power < ON/ OFF> swit ch again will t urn t he print er < OFF> .
Not e: I t is necessary for t he m obile com put ing device you are using t o discover t he
print er. Refer t o t he inst ruct ions provided by t he syst em s int egrat or.
Not e: Syst em s I nt egrat ors: Refer t o t he Bluet oot h™ m anual provided wit h your m obile
com put er and t he Bluet oot h™ sect ion of t he Developer's Manual available for t his print er.
3 .6 M a gn e t ic St r ip Re a de r

The Magnet ic Card Reader is a fact ory- inst alled opt ion. This opt ion requires special
applicat ion soft ware t o read and process cards wit h a m agnet ic st rip, such as a credit card
or a driver's license.

Quickly sw ipe t he card t hrough t he reader eit her left t o right or right t o left . The m agnet ic
st rip m ust be facing t oward t he paper supply door as indicat ed below while it is passed
t hrough t he reader.

Refer t o Table 4 for t he descript ion of t he LED indicat or St at us.
LED in dica t or
Green
Red
Ta ble 4 - M a gne t ic Ca r d LED I n dica t or
St a t e
ON
OFF
ON
St a t us
Ready/ wait ing for card t o be swiped.
Good swipe - Card dat a read
Card not ready t o be swiped.
Error reading card's dat a.
13
OR