Reading T He Led St At Us - Datamax APEX 3 User Manual

1 .3 Re a din g t h e LED St a t u s
Table 1 explains t he LED indicat or st at us. Refer t o
< ON/ OFF> and < FEED> push but t on swit ches and AC adapt er socket .
locat ion of t he st at us LEDs on t he front of t he print er.
LED
LED # 1
Communication
LED # 2
Battery
LED # 3
Magnetic Card
Reader
&
Printer Error
Not e: Refer t o t he t roubleshoot ing guide t o det erm ine error or fault condit ion.
FI GURE 4 : LED STATUS
Ta ble 1 - Re a din g t h e LED St a t u s
Status Condition
Power is ON and the printer is in RS232, USB or IrDA
Flashing
mode.
GREEN
Steady Communicating with host.
Flashing Power is ON and the printer is in Bluetooth mode.
BLUE
Steady Transmitting/receiving
Flashing Power is ON and the printer is in 802.11b/g mode.
AMBER
Steady Transmitting/Receiving
RED Steady Low power indication.
Battery being charged. The LED will turn off when the
AMBER Steady
battery is fully charged.


Steady
GREEN


Steady
RED
Flashing Indicates the print head is hot and printing is paused.
5
Figure 1 for t he locat ions described for
Function
Indicates that MCR is ready to accept data.
Indicates that SCR is ready to accept data.
Printer Error. The printer is out-of-paper or Paper
door is open.
MCR/SCR faulty condition.
Figure 4 provides t he