Justify Settings; Top/Left; Center; Bottom/Right - Planar m40L Installation Manual

Justify Settings

Justify determines how the picture will be placed in a wall of displays. For a single
display, Justify determines placement on the screen. For a wall of displays, if the
image is not large enough to fill all the displays in the wall, some will be left blank.

Top/Left

Positions the image starting with the top, leftmost display, then across and down.

Center

Positions the image starting with the center of the image in the center of the wall
spreading out equally to all displays.

Bottom/Right

Positions the image starting with the bottom, rightmost display, then across and up.

Overscan

This is used to hide blank areas and stray lines in the edges of an image. The lower
the overscan setting, the more of the optical image that is seen. Planar displays have
a default overscan of 3% for S-Video and composite video images. Standard CRT
televisions have an overscan of about 5%, which may actually hide content or images
that you want to see.

Border Color

This determines the color of the "extra" space around the picture if it doesn't fill the
screen. The choices are: black, red, white, red, green, blue, dark red, dark green and
dark blue.
Note:
because there will be no border.

Wall Width and Wall Height

See "Wall Width and Wall Height" on page 44.

Unit Column and Unit Row

See "Unit Column and Unit Row" on page 44.
When the
SCALE MODE
m40L/m46L Installation Guide
is , the
FILL SCREEN BORDER COLOR
Justify Settings
line will be grayed out,
37