Auto Backlight On; Turn Backlight Off With No Source And Dpms Delay - Planar m40L Installation Manual

Auto Backlight On

Auto Backlight On
If
AUTO BACKLIGHT ON
power is applied. It won't wait for a remote control or RS232 command.
This is the normal mode for applications where the displays will be on 24 hours a day.
This way, no one has to manually turn on the backlights after a power failure.
Caution:
leave the m40L/m46L on for 24 hours a day. To get the most out of your display, see
"Recommended Usage" on page 4.
If the displays normally have the backlights off for part of the day or night, do not
check this box. Otherwise a power failure at night would turn on the backlights.

Turn Backlight Off With No Source and DPMS Delay

When checked,
to turn off after the source goes absent for the length of time specified in the
DELAY
an amount of time after which the source is absent that the backlights will shut off,
enter that number in the
70
is checked, the display turns on the backlights soon after AC
To prevent temporary image retention (TIR), is recommended that you do not
TURN BACKLIGHT OFF WITH NO SOURCE
line. If this line is not checked, the backlights remain on indefinitely. To specify
DPMS DELAY
m40L/m46L Installation Guide
(
DPMS
line.
) causes the backlights
DPMS