Planar m40L Installation Manual page 46

Scale Mode Settings
Affect on Input Type on 4 x 3 Display
Scale
4 x 3 source
Mode
(e.g. Standard Video
or VGA/SVGA/XGA)
One to No distortion
One
Example above
represents an XGA
input on an XGA
resolution display
(1024 x 768)
One to One
maintains the original size and aspect ratio of the picture. This may leave blank areas on all four sides. For
instance, a VGA picture (640 x 480) on a 16 x 9 display will occupy only a small area in the center of the screen. For UXGA
sources on a 16 x 9 display, this will crop the picture top, bottom, and sides. The primary use of One to One is to display the
image without scaling artifacts and with minor cropping.
The One to One Scale Mode will produce different cropping results and the image size will be different for each input
resolution.
36
16 x 9 source
(e.g. 1080i or WXGA
computer source)
Fits width of image
without distortion; fills
height with border
Example above
represents a 1080i
(1920 x 1080)
resolution
m40L/m46L Installation Guide
Affect on Input Type on 16 x 9 Display
4 x 3 source
(e.g. Standard Video or
VGA/SVGA/XGA)
Displays image without
distortion at actual size
with border on all sides
Example above represents
a VGA input
16 x 9 source
(e.g. 1080i or WXGA
computer source)
Displays full image
without distortion
Example above is for
1366 x 768 input on
1366 x 768 native
resolution or 1920 x 1080
input on 1920 x 1080
native resolution