Installing an
m40L/m46L
This section explains how to install an m40L/m46L. We suggest that you read the
entire section before you attempt to install the unit.
Before You Begin
Make sure you have all the items in these lists before you begin unpacking and
installing your m40L/m46L(s).
Tools/Equipment List
Depending on your installation, you may need one or more of the following items:
Other Things You May Need
Plan Your Installation
You should have a detailed plan of how the units are to be configured. The plan
should include calculations for the following:
• String/string level
• Digital/laser level
• Ladders/lift
• Back brace
• Stud finder (if hanging display on a wall)
• Computer network LAN cables (straight through - no crossover) to interconnect
multiple displays for RS232 control
• LCD screen cleaner or LCD wipes - available at most electronics stores
• At least two very strong people to help lift units into place
• Power (maximum of three units per 20A circuit for 115V operation)
• Cable runs
• Ventilation and cooling requirements
• If hanging display on a wall, location of studs in the wall
m40L/m46L Installation Guide
7