Related Manuals for Planar CleanPole M3POLE-PS2
Summary of Contents for Planar CleanPole M3POLE-PS2
- Page 1 Planar Clean Pole™ Installation and User’s Guide Model Number M3POLE-PS2 The Definition of Quality...
- Page 2 Copyright © 2000, Planar Systems All rights reserved. The information in this document is subject to change without notice. Planar Systems assumes no responsibility for any errors that may appear in this document. This publication may not be reproduced, stored in a retrieval system or transmitted by any means without prior written permission of Planar Systems.
-
Page 3: Table Of Contents
INTRODUCTION... 1 WARRANTY INFORMATION... 2 Commencement and Duration of Warranty... 2 Place of Repair or Replacement... 2 Limitation of Warranty ... 2 TECHNICAL ASSISTANCE ... 3 Installation ... 3 Customer Support ... 3 OPERATOR’S SAFETY SUMMARY ... 4 Safety Summary... 4 Terms and Symbols... - Page 4 Clean Pole Installation and User’s Guide...
-
Page 5: Introduction
INTRODUCTION Thank you for purchasing Planar's mobile Clean Pole . The Clean Pole is to be used to add mobility to the Clean Screen™. To recharge, plug the Clean Pole unit into a standard outlet. The battery system includes one six-cell twelve-volt battery and a recharger, packaged on the base of the Clean Pole. -
Page 6: Warranty Information
Planar, and to any drawings or specifications furnished to Planar by the Buyer if approved by Planar. This warranty shall be effective only if Planar receives notice of such defect or nonconformance during the period of the warranty. -
Page 7: Technical Assistance
Planar, any authorized dealer or any other person's rendering of technical advice, assistance or services in connection with the buyer's order of the goods furnished hereunder. The Buyer is not relying on Planar's skill or judgment to select or furnish suitable goods. -
Page 8: Operator's Safety Summary
Federal law requires that Lead Acid batteries be disposed of in a safe and ecologically sound fashion. If in doubt as to how to accomplish this please contact your state government or Planar Systems for assistance. Ventilation Avoid overheating by keeping slots and openings unblocked. -
Page 9: Terms And Symbols
Damage Requiring Service Unplug the unit from the wall outlet and call Planar Customer Service when any of the following conditions occur: A. When the power cord is damaged or frayed. B. If the unit does not operate normally by following the operating instructions. -
Page 10: Assembly Instructions
ASSEMBLY INSTRUCTIONS Introduction The Clean Pole is a product designed to be used with the Clean Screen computer workstation. Assembly Instructions Tools Needed To assemble the Clean Pole, you will need a Phillips head screwdriver, two Allen wrenches (found in box), and the bags of screws (found in box). Step 1. -
Page 11: Disassembly Process
Step 2. Cabinet Attachment Step 3. Z-bracket/Pole Attachment Step 4. Clean Screen Attachment Disassembly Process Disassembly is accomplished by reversing the assembly sequence. Remove the Z-bracket from its shipping box. You will find small bags of screws in a bag inside the box. Remove the keyboard cabinet from its shipping box. -
Page 12: Connecting The Clean Pole Charger
Please call Planar Systems Customer Service at if you have any questions. Batteries must be disposed of in a responsible fashion. If in doubt regarding proper battery disposal methods, please contact Planar Systems at (503) 690-1100. -
Page 13: Operating Instructions
OPERATING INSTRUCTIONS The Clean Pole Power System is intended to provide power to the Clean Screen Computer Workstation in a mobile environment. The battery in the Clean Pole Power System will power the Clean Screen up to 12 hours before needing a recharge. Maximize battery life by recharging the battery when the low charge alarm activates. -
Page 14: Service Safety Summary
SERVICE SAFETY SUMMARY Note: This section is intended for qualified service personnel only. Refer to the preceding Operator’s Safety Summary. Do not service the Clean Pole with the power on. WARNING Dangerous voltages exist at several points in this product. To avoid personal injury, do not touch exposed connections and components while power is on. - Page 15 6. Using a 5/16" wrench, remove the #6 kepnut from the aluminum retaining strap across the top of the battery. Remove the strap. 7. Use the yellow band to lift the battery from the chassis. The battery is heavy. CAUTION Battery Reinstallation 1.
-
Page 16: Internal Fan Cleaning
Internal Fan Cleaning Periodic cleaning of the internal fan is required. Perform servicing during each battery replacement. Tools Required To clean the internal fan you will need a Phillips head screwdriver, a small vacuum cleaner, and a soft-bristle brush. Make sure the Clean pole is disconnected from the power before proceeding. CAUTION 1. -
Page 17: Specifications
SPECIFICATIONS The Clean Pole is a battery-operated mobile mounting system for the Planar Clean Screen products. The roll-stand includes a wheeled base with adjustable height pole for use in supporting the Clean Screen computer with keyboard cabinet at an adjustable height, and a battery with dedicated charger at a fixed height. - Page 18 Environmental Characteristics Temperature Operating 0 C to 40 C Storage 0 C to 40 C Non-Condensing Humidity Altitude Operating Not restricted for air transport Non-operating Not restricted for air transport FCC Class A EMI Compatibility Electrical Characteristics Power Requirements Voltage 120 VAC RMS Current 2.1A...
-
Page 19: Maintenance
Returns will not be accepted without an assigned RMA number. In-transit damage is not covered by the warranty. We suggest you always insure your shipment. Planar will only pay for the return shipment by surface transportation. It is the responsibility of the sender to prepay transportation charges. - Page 20 Beaverton, OR 97006-1992 Tel. +1 (503) 690 1100 Fax +1 (503) 690 1493 sales@planar.com app_eng@planar.com OM720-00 Visit the Planar web site: Europe & Asia-Pacific OEM Sales Planar Systems, Inc. Olarinluoma 9, P.O. Box 46 FIN-02201 Espoo, Finland Tel. +358 9 42 Fax +358 9 420 0200 intlsales@planar.com...