Bravo-Brava
Fault diagnosis
Analytical charts
55D.
Extract connectors 86 & 108
from their housings, bridge
the H/G coloured cables at
connector 86 and insert an
ohmmeter between the H/G
coloured cables at the con
nector for the lock 108
Not OK
Restore the continuity for
the H/G coloured cables be
tween the connector 86 and
the lock assembly 108
OK
Check the condition of the
left rear central locking mo
tor 108
Not OK
Overhaul or replace the cen
tral locking motor 108
The righ rear central locking motor is not working (Non existent for the Bravo versions)
Extract connectors 112 & 87
from their housings, bridge
the H/G col. cables at the
central locking c/unit con
nector 112 & insert an o h m -
meter btwn the H/G col. ca
bles for connector 87
Not OK
Restore the continuity for
the H/G coloured cables be
tween the ultrasound w e l d
ing and the connector 87
OK
Extract connectors 87 & 109
from their housings, bridge
the H/G coloured cables at
connector 87 & insert an
ohmmeter btwn the
H/G
coloured cables at the con
nector for the lock assy 109
Not OK
Restore the continuity for
the H/G coloured cables be
tween the connector 87 and
the lock assembly 109
OK
Check the condition of the
left rear central locking mo
tor 109
Not OK
Overhaul or replace the cen
tral locking motor 109
Copyright by Fiat Auto
71