Equipment; Composition Of Kit; Window Glasses; Introduction - Fiat Brava Service Manual

Bravo-Brava Bodywork
Window glasses
70.
INTRODUCTION
ThewindowsontheBravo-Brava meelindustrial
standards concerning the methods of remov­
ing/refitting fixed window glasses.
This system is greatly advantageous, both in
terms of quality because it ensures perfect
permeability and resistance to air and in terms
of safety because it makes the structure
stronger and quieter.
In addition to the windscreen and the
rearscreen the 3 door version also has bond­
ed side rear windows.
P4A045M01
EQUIPMENT
In order to remove and refit bonded windows the products and equipment described below must be
used
Composition of Kit
1. Cartridge of GURIT BETAS EAL sealant
2. 1/2 Cartridge of GURIT BETAS EAL sealant
3. Adhesion promoter (primer) for glass
4. Container of de-greasing product
5. Cloth for de-greasing
6. Wad for applying adhesion promoter
(primer)
7. Wire
8. N° 2 diffusors
The previous adhesive marketed by Direzione
Marketing e Commerciale Volvera has been
replaced with an improved product. It is BE-
TASEAL 1703 Sprint, in single compound
polyurethane with rapid polymerization.
This is undoubtedly an advantage because
the greater the hardening speed of the adhe­
sive, the less time the window has to be re­
tained with special equipment. In addition
the repaired vehicle can be returned sooner to
the Customer.
The mechanical characteristcis conform with
Capitolato Fiat Auto S.P.A.
Copyright by Fiat Auto
45