Ignition Switch - Fiat Brava Service Manual

Bravo-Brava
Electrical system
Various devices
55.
IGNITION SWITCH
Removing-refitting
1. Disconnect the battery's negative terminal
and remove the top and bottom steering
column shrouds. Insert the ignition key in
the ignition switch block and switch the
ignition ON.
2. Press on the retaining lug as shown in the
figure.
3. Withdraw the block from the tgnition
switch.
4. Remove the circlip at the rear of the igni­
tion switch block.
5. Press the lever for switching on the park­
ing lights and turn the key so that the step
A is positioned as shown in the figure.
Copyright Fiat Auto
41