Table of Contents
Advertisement
Attach the protective grille to the
1
window panel. Push the grille
firmly to ensure that its four
projections fit into the holes in the
window panel.
Cut the foam seal to the proper
2
length and attach it to the
windowsill.
Attach the window panel to the
3
windowsill.
If the inner width of the window is
a)
between 22" (559mm) and 24"
(609mm) wide:
1) Remove the adjustment panel
from the window panel, and
cut the window panel to the
same width as the window
frame opening.
2) Open the window and place
the window panel on the
windowsill.
3) Secure the window panel to
the windowsill.
NOTE: The window panel cannot be
installed in windows less than 22"
(559mm) wide as you will be unable to
shut the exhaust cover
Edgestar Portable Air Conditioner
Window Kit Installation Instructions
4
Advertisement
Table of Contents
