Parts Included; Preparations For Installing The Window Kit - EdgeStar AP16000G Owner's Manual

Suggested Tools- Phillips
Screw Driver (Medium
sized), Tape Measure/Ruler,
Scissors, Saw (In the event
that your window panel
needs to be cut down in size
for installation)
NOTE: You may need to
contact your electrician if
your room's circuit is not able
to power your unit.
3

Parts Included

Preparations for Installing the Window Kit

You must vent your portable air conditioner when running it in
cooling mode. Your unit includes a window exhaust kit that can be
used to vent the unit out a window.
Before you begin, make sure you have all the parts necessary for
installation.
If you have multiple windows, choose one that is near an electrical
outlet that will be able to provide sufficient power to your unit. See
the power requirements listed on the product label printed on the
side, or on the back of your portable air conditioner.
Your window kit can be installed on a horizontal or vertical sliding
window as shown in the following pictures to the left.
Please follow the installation instructions carefully to avoid personal
injury or damage.