Table of Contents
Advertisement
POST
Failing device or
message
problem found
163
Time of day has not
been set.
164
The memory
configuration has
changed.
201
The memory
configuration has
changed.
289
A failing DIMM was
disabled.
301 and
Keyboard and keyboard
303
controller
11xx
Serial port error
1162
Serial port configuration
error
1601
BIOS code update
needed
1800
PCI adapter hardware
interrupt
2400 and
Video adapter and
2462
memory
00180xxx
A PCI adapter requested
a resource that is not
available.
012980xx
Data for microprocessor
and
x
012981xx
I9990305
POST could not find an
operating system.
Suggested action
Set the date and time.
v Run the Configuration/Setup Utility program; then,
exit, saving the configuration settings.
v Make sure that DIMMs are seated and installed
correctly.
Make sure that DIMMs are fully seated and installed
correctly.
Make sure that DIMMs are supported by your server
and that they are installed correctly.
Make sure that the keyboard cable is connected and
that nothing is resting on the keyboard keys.
Make sure that the serial cable is connected
correctly.
Run the Configuration/Setup Utility program and
make sure that the IRQ and I/O port assignments
needed by the serial port are available.
Download and install the latest level of system BIOS
code.
Run the Configuration/Setup Utility program and
make sure that the interrupt resource settings are
correct.
Call for service.
Run the Configuration/Setup Utility program and
make sure that the resources needed by the PCI
adapter are available.
Download and install the latest level of system BIOS
code.
Install an operating system.
Chapter 6. Solving problems
59
Advertisement
Table of Contents
